Features

·The V method coating has the characteristics of good adhesion, good stability under pouring impact, high strength after drying or self-drying, no delamination and no cracking.

·Our series of coatings have the characteristics of high refractoriness, good peelability and low gas evolution. The surface of the casting is smooth, without blow hole and sand burning.

·Our series of coatings have good brushability, adhesion and suspendability, and has be widely used in railway accessories, forklift counterweights and aviation support products.

Application

Suitable for cast iron, cast steel and non-ferrous alloy castings. We can develop special products according to customer‘s need.

Instructions

·Before using, the coating should be diluted to the required density, then stirring evenly.

·Use the method of spraying and brushing, make the coating dry naturaly or by low temperature.                           

Storage and transportation

Storage period: 3 months

The coating should be far away from the fire source during storage, transportation or use. Coating should be seen as the inflammable and explosive goods to handle.